| POE Test |
| PD Test | The tester receives the power(POE 802.3at), power supply voltage detection |
| PSE Test | The tester supplies the power(POE 802.3at)25.5W, PD actual power detection |
| HDMI Test |
| HDMI Input | Support 720P@25/30/50/60 Fps, 1080P@25/30Fps input signals to dispaly |
| HDMI Output | Support 720P@25/30/50/60 Fps, 1080P@25/30Fps various formats video signal |
| Audio Test |
| Audio Input | Support audio signal input test |
| Digital Multi-meter |
| DC Voltage | 2/20/200/600V measuring range, 0.1mV minimum resolution |
| AC Voltage | 20/200/600V measuring range, 1V minimum resolution |
| DC Current | 20/200/2000mA measuring range, 1μA minimum resolution |
| AC Current | 20/200/2000mA measuring range, 1μA minimum resolution |
| Resistor | 2/20/200KΩ 2/20MΩ measuring range, 0.1Ω minimun resolution |
| Capacitance | 2/20/200nF 2/20/200μF 2/20mF measuring range, 1pF minimun resolution |
| Diode Forward Voltage Drop | 2V measuring range, 0.1mV minimun resolution |
| Conductivity | 2KΩ measuring range, 0.1Ω minimun resolution |
| Optical Power Meter |
| Type of Detector | InGaAs |
| Calibration Wavelength | 1625nm/1550nm/1480nm/1310nm/1300nm/850nm |
| Power Range(dBm) | -70 - 10 dBm |
| Measurement Accuracy | <± 0.3dB(-10dBm@22℃) <± 0.5dB(Full scale range@22℃) |
| Display Resolution | Linear display: 0.1%, Logarighmic dispaly: 0.01dBm |
| Connector | Interchangeable FC/PC |
| Power Supply |
| Charger | 12V/1.5A 5.5mm round-plug power supply |
| Battery | Two lithium batterys(18.5Wh) which can support 8~10 hours(it can work with a single battery) |
| Charging | 12V/1.5A(18W) charging about 3~4 hours. |
| Power Output | 12V/2A output interface: Round, external diameter 4mm, Internal needle: 1.6mm |
| PTZ Control test |
| Coaxial PTZ Control | HDCVI/HDTVI/AHD protocol |
| RS485 Control | More than 30 protocols including Pelco-D/P, Samsung, Panasonic, Lilin, Yann & etc. |