Shop By Category

Power Supplies

Powerbox 13.8VDC 10Amp Power Supply Kit with Battery Charging and Metal Enclosure - PB256-1210KIT

Product Code: PBB2561210KIT

Are you a tradesperson?

Get access to our best prices



Description

Powerbox® security cabinet wall mount enclosure with 13.8Vdc 10Amp power supply with battery backup.

The PB256 Series is a family of 13.8Vdc, 110W / 140W off-line battery chargers / DC uninterruptable power supplies which operate from 220/240Vac mains power. when connected to a lead-acid battery. These units provide uninterrupted power to a DC load in the event of mains failure.

The PB256 Series contains a two-step current limited float charger, battery charge current limiting, a battery low voltage disconnect and mains/charger and battery alarms. It employs high efficiency technology, combined with very low output noise that makes it suitable for powering broad range of loads such as communication equipment, control equipment and alarm systems etc.

The PB256 is available in chasis mount enclosure, and can be fitted into the WMBB wall mount box. A supplementary heatsink is needed for 140W models to operate at maximum power. All models employ natural convection cooling.

  • 138W 12VDC.
  • Battery Backup System.
  • DC UPS Connectable.
  • Independent Load and Battery Current Limited.
  • Converter ON/OK alarm.
  • Battery Low Alarm.
  • Battery low voltage disconnect switch with internal electronic circuit breaker.
  • Battery Over Load protection.
  • Conformal Coating option for wet areas.
  • C-Tick Approved.
  • Security cabinet.
  • Wall mounted enclosure.
  • Suits power supplies PBB2S1335 & PBB2S137.
  • Power supply mounting brackets included.
  • Vented cabinet.
  • Flexible 2 x GPO cut outs.
  • Tamper switch.
  • Battery cable options.
  • Accepts batteries 7AH to 17AH.
  • Dimensions 325 (W) x 305 (H) x 105mm (D).
Technical Specifications
Brand Powerbox

Recently Viewed

Loading Icon
No Recently Viewed Products

CCTV SYSTEMS

Products to compare:
Comparing Products