Simplified non-solenoid blocking design for high dependability.

The Titan™ D-Drive™ lock features motor driven locking mechanism for an extra measure of security and longer battery life.

Installation

The Titan™ uses an exclusive, no-twist cable design that virtually eliminates the risk of cable damage due to keypad rotation. The cable is located in a recessed channel in the lock’s extruded aluminium spindle, safely out of harm’s way.

Easy retrofit thanks to a standard S&G Magic Module footprint, no need for boltwork or mounting screw
location changes.

Non-handed for RH. LH, VU and VD mounting.

Operation modes

Three modes of operation are available.

Multi-User: The Master Code, Supervisor Code, and any User Code can open the lock with a single code.

Manager/Employee: Code holders can access the safe only when it’s been enabled by a Master Code or Supervisor Code holder.

Dual Control: Multi-User mode is the factory default, but Dual Control is keypad selectable as an alternate, permanent mode of operation. Two different lock codes must be entered within one minute of each other to open the safe. This provides a higher level of security.

All programming is quickly and easily done via the keypad (no separate programming equipment required).

When a time delay override code is set, the number of available user codes is seven. If the lock is set to multiple user mode and duress is turned on, only User Codes 2 and 3 are available. User Codes 4 – 8 are disabled. User Code 9 will be available to use if time delay override is not enabled. Loss of User Codes when duress is enabled is required to meet EN1300 specifications for this product. If the lock is set to dual user mode, all codes always remain available.