TMPro2 (Transponder Maker 2) is a leading locksmith tool for creating keys, preparing transponders, key copying, and PIN code calculating. The hardware consists of a small box which connects to a pc by way of the provided USB2 lead. In addition to being a transponder Read/Write tool the TMPRO base unit is also an eeprom programmer.

Also included in the kit is an:

• EEPROM Adaptor board.
• Connector cable allowing connection between the EEPROM Adaptor board and the TMPro device.
• 8 wire EEPROM cable.
• 7 wire Pic Adaptor cable.

The software interface is stand alone, supported by all modern Windows platforms, is very easy to use, and offers accurate solutions for a wide range of vehicles.

Hardware functionality is determined by purchased modular software, meaning all supported immobiliser boxes require a separate, specific module. Additional software module orders are easily created through the software interface, and processed by LSC.

TMpro2 works with immobiliser eeprom files which have been read electronically after removing the vehicles Immobiliser or main ECU. Sometimes the file can be read in-circuit with specialist equipment, or in some cases a device may need to be de-soldered and soldered again in order to read the required electronic file. Once the file has been saved it can simply be dragged into the TMPro2 software interface and if correct, the relevant software module will appear on the screen, validating your file. Then simply program your new transponder, refit the vehicle immobiliser box into the vehicle and the car will be ready to start.